TechCorr Non-Destructive Testing Shear Wave Testing

On the left, the ultrasonic beam passes through a non-defective weld without reflecting back. As a result, no significant indications appear on the waveform monitor. On the right, a discontinuity within the weld zone results in a strong reflection of the beam and a spike in the waveform.

Thorough Weld Inspection

Shear wave testing, also known as angle beam inspection, is an ultrasonic testing technique used primarily for weld inspections.

A probe consisting of an ultrasonic transducer coupled with a plastic or epoxy wedge introduces an ultrasonic beam at an angle into a test area. As the probe is moved back and forth along the area, it can detect discontinuities in the weld based on the reflection and refraction of the ultrasonic beam.

Ideal for Welds

Straight beam techniques are well-suited for finding defects that are oriented parallel to the surface of a material. But straight beams are often not effective when inspecting welds where defects are commonly not parallel to the surface.

The combination of awkward weld geometry and the presence of a weld crown or bead typically requires inspections from the side of a weld using beams generated at an angle. Consequently, shear wave testing is the most commonly used technique for weld inspection.

Highly Trained Personnel

For inspections to be effective, inspectors must be experienced and well-trained. TechCorr’s crews of inspectors, technicians, and analysts provide the highest level of service.

We come equipped not only with an understanding of shear wave testing, but also with a comprehensive skill-set of conventional and advanced non-destructive testing techniques.